Sweet potato starch processing line

Similar with potato starch processing line and cassava starch processing line, the production process in sweet potato starch processing line is basically the same. As a professional and experienced starch processing machine manufacturer, Doing Company can independently design and manufacturer the complete set sweet potato starch production line. DOING sweet potato starch processing line adopts wet processing for starch production, which requires that there is no any additive added in the whole production process.

DOING sweet potato starch processing line with mature technology, advanced equipment, reasonable design. The whole set machine used in sweet potato starch processing line includes: feeding machine, dry sieve, rotary washing machine, rasper, centrifuge sieve and fine fiber sieve, desander, hydrocyclone station, vacuum filter dewatering, flash dryer, sieving machine, packaging machine.

Sweet potato starch processing line

The production process in sweet potato starch processing line is as below:

1.Cleaning: Using dry sieve to remove the outer peelers, attached sand, leaves and other debris. This is the first step to ensure high quality starch.

2.Washing: Rotary type washing machine is adopted to wash sweet potato which has the features of large capacity, high efficient and good washing effect. In sweet potato starch processing line, the cleaning and washing are the basics for further processing.

3.Grating: Then it comes to the most important procedure in the whole sweet potato starch processing line. Grating serves to grate sweet potato into mesh to extract free starch out of cell. The more starch extracted, the higher starch yield.

Sweet potato grating machine

4.Starch and residue separation: To remove fibers out of starch slurry. Multistage centrifuge sieve is adopted in DOING sweet potato starch processing line for better separation effect.

5.Sand removal: The sand in starch slurry not only effect the taste of starch, but also reduce the fineness of starch, therefore it is required to be discharged in sweet potato starch processing line by desander.

6.Hydrocyclone refining: To use 18 stage hydrocyclone station in series to achieve the concentration, refining, washing and recovering of starch slurry in sweet potato starch processing line.

7. Vacuum filter dewatering: The main purpose of this step is to reduce the water content to the required quality for drying. The moisture content after dewatering is about 38%-40% in sweet potato starch processing line.

Vacuum filter dewatering machine

8.Starch drying: Followed dewatering step in sweet potato starch processing line, drying is used to dry cassava starch to meet the commercial standards. Special cooling system is adopted by DOING flash dryer to ensure the moisture uniformity of starch.

9.Sieving and packing: The dried starch enters into sieving machine to sieve away large particles so as to further improve the fineness of starch. And the finished starch is packed for warehousing.

Doing Company sweet potato starch processing line is automatic production line, it only need few workers to operate the full processing line. From putting the raw material (fresh sweet potato) into the sweet potato starch processing line until get the final dry starch is around 30 minutes. During the sweet potato starch production, it only need raw material, power, water and a few workers, do not need any other chemical additives.